RESIDUE-FREE
CARPET CLEANING
THAT LASTS.
Most carpet cleaners leave behind soap residue that attracts new dirt within days. Our RF™ process removes the dirt AND the residue — so your carpets stay cleaner up to 3× longer.
🌸 Spring Offer — Ends April 30
RF99™ — First Room $99
One room up to 200 sq ft + deodorizing treatment OR carpet protector. Zero residue. Zero re-soiling.
WHY YOUR CARPETS
GET DIRTY AGAIN SO FAST
Traditional carpet cleaning uses detergents to lift soil. The detergent removes the dirt — but it stays in the fiber itself. That sticky residue acts like a magnet for new dirt.
Result: carpets that look clean for 10–14 days, then look worse than before you paid to have them cleaned.
🔬 Read the full science of residue-free cleaning →❌ Traditional Cleaning
- • Leaves soap residue deep in carpet fibers
- • Residue acts like a magnet for new dirt
- • Carpets re-soil within 2 weeks
- • Wet carpets for 24–48 hours
- • Fibers feel stiff or sticky after drying
✅ RF™ Cleaning
- • Removes dirt AND residue completely
- • Nothing left behind to attract new dirt
- • Stays cleaner up to 3× longer
- • Dry in 4–6 hours
- • Fibers feel soft and natural
PROCHEM + ROTOVAC.
REAL RESULTS.
Professional Prochem truckmount with Rotovac Powerwand 360 in action. 300-500 PSI. Zero residue.
Prochem truckmount extraction
RF process in progress
Zero residue. Dry in 4-6 hours.
FIVE STEPS.
ZERO RESIDUE.
Pure Flow Mark™
pH 8.5–9.0 alkalinepH-balanced pre-spray breaks down soil and old residue — applied 5–10 min before extraction
Residue Break™
200°F · 1,200+ PSI200°F hot water extraction at 1,200+ PSI reaches deep fiber contamination invisible to pre-inspection
Zero Trace Seal™
pH 6.5–7.0 neutral rinseNeutralizing rinse binds to remaining surfactant molecules and encapsulates them for removal
Clean Wake™
pH verifiedpH meter verification confirms fibers at neutral 6.8–7.2 — UV light inspection for biological contamination
Clear Path Icon™
4–6 hour dry timeLow-moisture extraction + airflow = dry in 4–6 hours. No residue means no dirt trapping during drying
WHAT'S LIVING IN
YOUR CARPET RIGHT NOW
CARPET CLEANING
QUESTIONS ANSWERED
How much does carpet cleaning cost?
RF99™ starts at $99 for the first room (up to 200 sq ft) plus a free deodorizing treatment OR carpet protector. Additional rooms are $50 each. Call 443-856-3244 for a full home quote.
How long does carpet cleaning take?
Most rooms take 20–40 minutes. A full home is typically 2–4 hours depending on size and condition.
How long until I can walk on the carpet?
With RF™, carpets are walk-ready in 4–6 hours. Traditional cleaning requires 24–48 hours because residue keeps fibers wet and sticky.
Is it safe for pets and children?
Yes — completely. The RF™ process removes all cleaning agents from fibers. Safe immediately after drying.
Do you move furniture?
We move light furniture at no charge. Heavy furniture requires a small additional fee. We always replace furniture on protective pads after cleaning.
What is the RF™ difference vs Stanley Steemer or Oxi Fresh?
Both use traditional hot water extraction with detergent — leaving residue that attracts new dirt within 2 weeks. RF™ adds a neutralization step that removes the cleaning agent itself, keeping carpets cleaner 3× longer.
Do you serve my city?
We serve 33+ cities across Maryland and Delaware's Eastern Shore. Call 443-856-3244 to confirm availability.
Carpet Cleaning Across the Eastern Shore
Every city. Same RF™ standard.
READY FOR RF™
CLEAN CARPETS?
Residue Doesn't Survive Here™ · Serving 33+ cities across MD & DE